www.avsl.com
100.640UK
1.
ANC Button and LED indicator
Press to activate the active noise cancelling function. The LED indicator will illuminate red when active.
2.
LED charge indicator
Illuminates red when the headphones are connected to a USB power source and charging. It goes out when they are fully
charged.
3.
USB charging port
To charge the headphones, connect to a USB power source using the cable provided. Ensure the headphones are fully charged
before first use.
4.
Next track/volume up button (+)
Short press to increase the master volume and long press to move to the next track. When the maximum volume is reached, an
audible tone will be heard.
5.
Multi-function button (O)
Press and hold to turn the headphones on or off. When turning the headphones on, an audible tone will be heard, and Bluetooth
pairing mode will be activated. The LED status indicator (8) will alternately flash red and blue until the headphones are paired with
a device. Select
‘AV:L
ink-Isolate
’
in your device’s pairing list
and use the
code ‘0000’ to pair
if asked by your device. When
successfully paired an audible tone will be heard and the LED indicator will flash blue.
In playback mode, short press to play and pause the current track or answer an incoming call. When a call is received, a ring tone
can be heard. To accept the call press once; to reject press twice.
6.
Previous track/volume down (-)
Short press to decrease the master volume and long press to select the previous track.
7.
3.5mm jack port
The headphones can be connected to any device with a 3.5mm jack output using the audio cable provided.
8.
LED status indicator
Flashes alternately red and blue in pairing mode; flashes blue when paired.
9.
Built-in microphone
Used to answer hands-free phone calls when the headphones are connected to a compatible device.
Troubleshooting:
Q
) The Bluetooth headphones will not pair with my device.
A
) Check that the headphones are in pairing mode; Bluetooth is enabled on
your device; and the device is
set as ‘discoverable’.
Q
) The Bluetooth headphones disconnect with my device within the stated 10m transmission distance.
A
) The maximum transmission
distance stated is dependent on a clear line of sight between the headphones and your device. If there are large metallic objects or
other devices transmitting radio or wireless signals in the vicinity, they may impact on the reception of the headphones.
Q
) The Bluetooth headphones won
’
t reconnect with my device.
A
) On occasion, your Bluetooth device or the headphones may enter a
locked state and need resetting. To do this, Turn the headphones off, find them in
your device list and select “forget this device”.
Then, follow the pairing instructions described in fig
5
above.
Q
) Why can
’
t I play the music from my TF card?
A
) Ensure the card is inserted correctly and that the music is in either MP3 or WMA
format. The maximum size of memory the headphones can handle is 64GB and the media should be formatted in FAT32.
Do not attempt to service this product yourself as opening or removing covers may result in fire, electric shock or
equipment damage and will also invalidate the warranty. This product is only designed for indoor use and must be kept
away from water and high humidity, along with high temperatures and direct sunlight.
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its
useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2019 AVSL Group Ltd.
