H
H
H
X
X
X
-
-
-
2
2
2
3
3
3
8
8
8
4
4
4
Z
Z
Z
/
/
/
H
H
H
X
X
X
-
-
-
3
3
3
3
3
3
1
1
1
6
6
6
0
0
0
8
8
8
Z
Z
Z
19
5.2 Rear Panel
HX-2384Z supports up to 8 input jacks (HDMI Type A) and 4 output jacks (RJ-45) on the
rear panel, each female terminals form the signal input/output jacks. The HX-2384Z
signal input/output terminal channels are numbered as IN1~8/OUT1, 3, 5, 7 channels.
Figure 5-5 HX-2384Z Rear Panel
The HX-331608Z supports up to 16 input jacks (HDMI Type A) and 8 output jacks (RJ-45)
on the rear panel, each female terminals form the signal input/output jacks. The
HX-331608Z signal input/output terminal channels are numbered as IN1~16/OUT1, 3, 5,
7, 9, 11, 13, 15 channels. The input terminal channels supply you to connect to different
equipment including Blu-ray/DVD players, graphics workstations, and number displays.
The output jacks allow you to connect to extensible accessory devices for over long
connections with terminals just like projectors, video recorders, displays and multiplexers
and so on.
Figure 5-6 HX-331608Z Rear Panel
Power Port:
The Power Port is applicable for 100~240VAC, 50~60Hz connected to
the outlet of power source. Refer to
6.4 Power Connection
.
Power Switch:
To switch power
ON
or
OFF
the Matrix Switcher.
RS-232:
Use a 9-pin
RS-232
cable to connect both computer serial port (COM1 or
COM2) and Matrix Switcher
RS-232
communication port, refer to
6.6.1 RS-232.
The
computer then can be deployed to control the Matrix Switcher after installing of
application software. Refer to
7.1 Software Introduction
for a software control or
