H
H
H
X
X
X
-
-
-
2
2
2
3
3
3
8
8
8
4
4
4
Z
Z
Z
/
/
/
H
H
H
X
X
X
-
-
-
3
3
3
3
3
3
1
1
1
6
6
6
0
0
0
8
8
8
Z
Z
Z
17
Figure 5-4 Aspect Ratio for 1:1
INFO:
This key can show you the ID, IP address and In/Out port information.
-
Press this key to show you the connected ID and address.
-
Press this key again to show you the status of all HDMI Type A or RJ-45 jacks
on the rear panel. If the HDMI or RJ-45 jack is in HPD (hot plug detect), it will
appear
“O”
on the screen. Alternatively, it will appear
“X”
specified the HDMI or
RJ-45 jack is unused.
Press
SETUP
and
INFO
keys simultaneously to show you the firmware versions of
modules.
STO:
The
“Store Key”
saves all current output/input corresponding relations up to 8
sets for a memory control.
-
Press the
“STO”
key firstly.
-
Arrange memory location. (Support up to 8 sets of memories, user can select
the memory location through OUT1~OUT8/IN1~IN8.)
-
The relations among all settings will be saved in the memory permanently.
RCL:
The
“Retriever Key”
retrieves all settings that are saved in the memory.
-
Press the
“RCL”
key firstly.
-
Then make a random to select one of output/input channel key 1~8.
-
The system will retrieve the saved all status and implement current status
switching if the previously saving channel is selected.
Press and hold
STO
and
RCL
keys simultaneously at least 1 sec. to restore to factory
default values.
