9
Walk Test
Replace the front cover during the walk test.
Apply power and wait at least two minutes for
the detector to stabilize.
The LED is viewed through the detector lens.
Walk through the entire protected area and
observe the LED to confirm full coverage. If
the swivel is used, adjust it when necessary.
To prevent false alarms adjust sensitivity at
minimum and pulse at mode 3 setting (factory
default is mid range).
When adjustment is complete, tighten the PIR
cover screw. For Eye-Spy II with swivel
bracket, refer to figure 3; tighten the two
adjustment screws.
WARNING: Test this alarm
product at least once a week.
Av-Gad Limited Warranty
Av-Gad Systems Ltd. and its subsidiaries and affiliates
(“Seller”) warrant its products to be free from defects in
materials and workmanship under normal use for 12 months
from the date of sale.
Because Seller does not install or connect the product and
because the product may be used in conjunction with products
