8
It’s recommended to set the Pulse jumper at 3.
Jumpers Setting
(pull to remove)
LED:
To disable the LED indication, move the LED
jumper to OFF.
PULSE:
Set the PULSE jumper in position 1 or 3,
corresponding to the desired pulse count.
Highest sensitivity is at position 1. Position 3 is
recommended to prevent false alarms (lower
sensitivity). Factory default is no pulse count.
EOL MODE (Jumper Settings):
Starting Sep. 2006 the EOL option removed.
PET MODE (Eye-Spy II Quad PET only):
Quad Pet is recommended for harsh indoor areas
and sites with Pets. Pet jump towards the PIR
may cause alarm.
Set the PET jumper in position 18 for small pet,
set at 30 kg for bigger pet, not higher than 70
cm. Factory default is 18 kg.
