Installation and Application
Installation and Application
Brackets Installation
Note:
Before installation, please ensure HDEX80-KVM is disconnected from the
power source.
Steps to install the device in a suitable location
1.
Attach the installation bracket to the enclosure using the screws that were
provided in the package separately. The bracket height can be adjusted
up/down or bracket face up or down.
2.
The bracket is attached to the enclosure as shown.
3.
Repeat steps 1-2 for the other side of the unit.
4.
Attach the brackets to the surface you want to hold the unit against using
the screws (provided by others).
5.
Repeat steps 1-4 to install the receiver.
