Installation Instructions
Installation Instructions
1.
Using quality HDMI cables, connect an HDMI source (such as
Blu-ray, games console, satellite/cable TV, media server etc.) to
HDMI IN of the Transmitter.
2.
Connect a good quality CatX cable between the HDBT OUT of the
Transmitter and the HDBT IN input of the Receiver.
3.
Connect the HDMI display device (LED/LCD display or projector)
to the HDMI OUT of the Receiver.
4.
Connect IR emitters from the IR OUT ports of Transmitter and
Receiver and firmly attach the IR emitter eye directly over the
infrared receiving sensors of the source and display device to be
controlled. Location of the emitter eye on each device may need
to be adjusted later to achieve best IR performance.
5.
Insert IR receivers into IR IN ports of Transmitter and Receiver.
Position the IR receiver eye on or near the display or source
device, ensuring a clear line of sight to the remote handset used
to control it.
6.
Connect the power supply to the Transmitter or Receiver and
power on all devices.
www.avaccess.com
6
