GPIO_WCLK Card Disassembly
Installation Manual
SatgeBox Kit V1.0
AuviTran 2011
8
4
GPIO_WCLK CARD DISASSEMBLY
Disconnect the cable that connects GPIO_WCLK card to power supply. To do that, simply press the tab on the connector
and pull-it up gently.
Keep the cable in a safe place for a future use if you want to transform your device back in installation mode.
Disconnect the flat cable that connects GPIO_WCLK card to the backplane, on GPIO_WCLK side. Just pull gently the flat
cable up and slide it outside the metallic guide.
WARNING
Be careful not to injure yourself with the metallic guide at the time of extraction of the flat cable.
Remove the black shrink tube of the flat cable (the shrink tube is no longer usable, no need to keep it).
Unscrew the two M3x6 black screws from the front of the GPIO_WCLK card.
Keep the two screws in a safe place.
Remove the two spacers at both ends of the GPIO_WCLK's card.
Keep the two spacers and two lock washers in a safe place.
