AVY16-ES100 User’s Manual
AuviTran
11
14.2.1
YGDAI Mode
The YGDAI mode is set by default to “16 Channels” mode.
The “16 channels” mode is compatible with new generation of YGDAI Slot and must be
used for PM5D, DM2000, DM1000, 02R96, DME64N, DME24N, LS9, M7CL, TXn Power
Amp and 01V96 Yamaha devices.
The “8 channels” mode is compatible with previous version of YGDAI Slot and must be
used for the following Yamaha devices: DIO8/PM1D.
Warning: If you put an AVY16-ES100 with “16 channels” mode set in an “8 channels”
only mini-YGDAI slot device, the AVY16-ES100 will be not recognised by the device and
you could have unknown behaviour in the device. It is strongly recommend muting first
all outputs before installing the AVY16-ES100 for the first time. Even if the AVY16-ES100
is not recognised by the host device, you can manage and then program it with
ESMonitor. First action in such device is to set the AVY16-ES100 in “8 channels” mode
and then reset the device.
14.2.2
“Lock Routing” function
“Lock Routing” is disabled by default.
The “lock routing” function allows to disable remote software modification of EtherSound
routing for the board. This is useful to prevent wrong patching during live event.
When the lock routing is set the “Hardware configuration Flag” of the property page is set
to “ON” which simulates an EtherSound hardware setting (routing done only by hardware
dip switch).
When the lock routing is disabled the “Hardware configuration Flag” of the property page
is set to “OFF” which enables software routing.
