AVY16-ES User’s Manual
AuviTran
11
14-2- AVY16-ES Control Page in ESMonitor
If the Control page is selected, ESMonitor will display the following information:
Live vu-meter are
displayed for each input
or output of your selected
AVY16-ES
You can set the RS232
parameters here if
tunnelling is started it is
set automatically
Here you can
enable or disable
AVY16-ES
emergency clock
Here you can lock
the routing to
disable patch
routing
modification
Channel management
(by default: 16 channels)
If the device selected is
Primary Master you can
set the remote device to
link to the local RS232
and start the virtual
tunnelling
Here you can set the
mode of your YGDAI
Here you can check your
AVY16-ES synch
If your console host port
is set to manage your
AVY16-ES you will see its
name and you could click
on ”Launch Manager” to
run the Yamaha studio
manager via EtherSound
otherwise “Not
configured” is displayed
All standard parameters of the AVY16-ES can be manipulated in this control page and
you can use the vu-meters to control remotely the audio sent and received by the
AVY16-ES to your Yamaha device.
