VERSION 1.4
JN30 (38346-X)
Features
The JN30B starting with rev 5 adds to extra 2 lanes CSI-2 connectors on the bottom side.
The supercap add-on module is still in design. It allows to power the JN30 and Nano for a few minutes to
supporters a graceful power down in case of a sudden power loss.
Auto flashing
Just connect a USB OTG cable from your host PC and power up the JN30/Nano. No need to press any switches.
The MCU will detect this condition and control the switches appropriately.
Add-on modules
- 38363: 4 port 100bT Ethernet with PoE PSE to connect to 4 network IP cameras
- 38372: M.2 LTE and M.2 Wifi adapter
- 38385: USB 2.0 to 4x USB 2.0 hub
- 38391: dev kit camera module and 2x GbE (i210 - JST-GH)
- 38392: dev kit camera module, 1x GbE (i210 - JST-GH) and mini UPS controller (supercaps)
AUVIDEA GMBH
TECHNICAL REFERENCE MANUAL
4
Feature
JN30-LC
JN30-PD
JN30-PSE
JN30-PSE48
HDMI out
✓
✓
✓
✓
Display port out
-
✓
✓
✓
48V power in capable
-
✓
✓
✓
micro USB 2.0 OTG
✓
✓
✓
✓
USB 3.0 type A
✓
✓
✓
✓
10/100/1000 Ethernet (RJ45)
✓
✓
✓
✓
IMU MPU-9250 (optional 9 axis
sensor)
-
✓
✓
✓
PoE version
-
PoE PD (class 4;
up to 25.5W)
PoE PSE (up to
15W)
PoE PSE (up to
30W out)
Components on both sides
-
✓
✓
✓
M.2 slot (NVME PCIe x4)
-
✓
✓
✓
UART0 (3.3V TTL debug access)
1
1
1
1
CSI-2 (22 pin - 4 lanes)
2
2
2
2
CSI-2 (22 pin - 2 lanes)
(starting rev 5 only)
-
✓
✓
✓
fan connector
✓
✓
✓
✓
power in (5.5/2.5mm)
6..12V
6 .. 48V
6 .. 48V
48V
UPS backup support
(supercap add-on module)
-
✓
✓
✓
