VERSION 1.4
JN30 (38346-X)
Overview
JN30 carrier board for the NVIDIA Nano
The JN30 has been designed slightly larger than the dev kit version but with the maximum performance and
full use of all the interfaces needed to serve your needs.
Technical details
• carrier board for one NVIDIA® Nano™ compute module (dev kit or production version)
• PoE (PSE/PD) optional
• one USB 3.0 type A vertical
• RJ45 connector for 1000bT Ethernet (GbE)
• UART 0 (3.3V TTL) (6 pin) - console access
• fan connector (4 pin)
• HDMI and display port out
• M.2 key M 2280 NVME PCIe x4
• size: 81,7mm x 104,6mm (size of the PCB with all components)
• height: 21 mm (with NVIDIA® Nano™ compute module)
• mounting: 4 holes with 3.2mm each
• model: 38346
Power
• power: 12 - 48V (depending on the version - more on page 05)
The diagram below shows how the ordering code is assembled.
Models:
The
JN30A
is designed for the dev kit version of the Nano compute module.
The
JN30B
is designed for the production version of the Nano compute module. The version is shipped as a
bare module. Auvidea can supply the mounting kit with spring and screws. Also a heat sink or a heat spreader.
The 2 versions of the Nano compute modules are not pin compatible and therefore not interchangeable.
AUVIDEA GMBH
TECHNICAL REFERENCE MANUAL
3
