Normal CD Operation - cont.
- The CD player can be programmed to play up to 64 tracks (songs).
- Always press the Stop button before programming.
- Press the Program button once, the display will show the memory symbol to indicate that the set is now
programmed into the CD player.
- There are different procedures for programming an audio CD and a MP3 CD. Read how below:
Programming Procedure For Normal Audio CD:
- Press the Next or Back button to select the song you would like to program.
- Press the Program button once to confirm your selection.
- For each additional song you would like to program, repeat steps listed above. Reminder, only 64 tracks
can be programmed to play at once.
- Once all songs are programmed, press the Program button. The display will now show memory to
indicate you have saved a program into memory.
- Press the Play button. The CD will start to spin and play your selected tracks in the program.
- To clear out your programmed tracks, simply press the Stop button. This will reset the memory and clear
the program.
Programming Procedure For MP3 CD:
- Press the Next or Back button to select the Album (Folder Directory) number which contains the song you
wish to program.
- Press the Program button to confirm.
- Press the Next or Back button to select the song number.
- Press the Program button to confirm.
- Repeat the last 4 steps, each time selecting an Album and track number to be played into your CD
program.
- After a maximum of 64 tracks have been programmed, press the Play button.
- To clear out the memory of your selected programmed songs, simply press the Stop button.
- This unit is capable of displaying the “Text Information” (ID3 Tag) of an MP3 song on the LCD.
- To turn “On” this function, simply press and hold the Find/Display button for 2 seconds.
- To switch back to Normal Display Mode (Display Track Number and Timer) press and hold the Find button
again for 3 seconds.
Text Display Mode (ID3)
12
Normal CD Operations - cont.
