AFTER SALES SUPPORT
1 888 367 7373
2-12-14 / ZQ2001
How to Operate
How to Operate
How to Operate
How to Operate
•
Make sure the vehicle and Jack Stands are on a level stable surface.
•
Lift the vehicle following the Car Jack instructions. Be sure to set the parking brake and block the unlifted tires.
•
Consult the vehicle’s owner’s manual to determine the location of the support points and position the stands
beneath the ideal points.
DO NOT CRAWL UNDER THE VEHICLE TO POSITION THE STANDS.
•
Raise the ratchet mast manually by pulling up on the mast to the highest position, making sure the ratchet
tooth is fully engaged by the locking mechanism.
•
Make sure both Jack Stands are at an equal height.
•
Slowly lower the vehicle onto the stands making sure the load is centered on the saddles. Make sure the load
and the Jack Stands are stable.
•
When the stands are no longer needed, raise the vehicle using a Car Jack high enough to clear the Jack Stands.
•
Remove the Jack Stands being careful not to crawl under the vehicle.
•
Slowly lower the vehicle to the ground with the Car Jack.
•
You may lower the ratchet masts by raising the release handle.
Because of potential hazards associated with this type of equipment, no alterations should be made to this
product.
Only the attachments provided with this product should be used. DO NOT substitute parts from another
product.
ANY JACK STAND THAT APPEARS TO BE DAMAGED IN ANY WAY, IS FOUND TO BE WORN, OR OPERATES
ABNORMALLY SHOULD BE IMMEDIATELY REMOVED FROM SERVICE.
7
Summary of Contents for ZQ2001
Page 1: ......