SYSTEM OVERVIEW
Disposable
Mouthpiece
WAB Serial Number
The Serial Number is located here
and will need to be quoted when
contacting your Service Centre.
Mouthpiece
Holder
Small Button
On/Off
Large Button
Once off
Emergency Override
WAB
Graphics Display
Displays procedural prompts, error
messages and shows the result of
the subject’s breath test, “PASS” or
“FAIL”. A battery icon, bottom right,
shows the power level and indicates
ongoing charging when appropriate.
Charging & Data
Download
Socket
Disposable Mouthpiece
The mouthpiece must be fitted into the mouthpiece holder before use
of the instrument for breath testing
Please note that the mouthpiece will only fit into the instrument if
orientated correctly. Unwrap mouthpiece from its protective packaging
and, with the location key facing downwards, slide the mouthpiece into
the opening on the right of the mouthpiece holder (with instrument
display facing you and buttons to the top). The location key must fit
into the corresponding guide slot in the holder and the mouthpiece
pushed in until it will move no further. Failure to correctly locate the
mouthpiece may result in the instrument refusing to take a breath
sample and therefore you being unable to start your vehicle.
The mouthpieces are disposable, manufactured under hygienic
conditions and supplied in individual wrappers.
We recommend that a new mouthpiece is used for each test
Disposable Mouthpiece
Disposable Mouthpiece
Location Key
Location Key
Lip Guard
Lip Guard
Guide
Slot
Guide
Slot
Mouthpiece Holder
Mouthpiece Holder
1
CONGRATULATIONS!
Your vehicle is protected by an AIBBS, Alcohol Immobiliser Breathalyzer Blocking System
designed to give years of trouble free operation, made with only the highest quality
components and using state of the art technology you can be assured that your vehicle has
the best electronic protection against drinking and driving available.
®
The
Autowatch WAB 100
provides protection from a vehicle being started and driven by
an individual whose blood/alcohol content is higher than a pre-determined level.
Ensure that comprehensive instructions and demonstration on the functions and
use of this system is provided by your Service / Installation Centre.
SYSTEM COMPONENTS :
VEHICLE BLOCKING SYSTEM (VBS)
This unit contains a buzzer and is wired into the vehicle’s
starting circuit. The VBS is not user accessible.
DRIVER CHANGE/RESET BUTTON WITH LED
Mounted within convenient reach of driver.
WIRELESS ALCOHOL BREATHALYSER. (WAB)
Hand held
The
LED starts to flash at a faster
rate while the vehicle is being driven thus
indicating that the driver must now
present a valid breath sample
RED
The blocking
LED stops flashing
RED
If no valid breath sample is
given in the period of
XX minutes the buzzer
stops sounding
If the ignition is turned off then the vehicle
will not be able to be re-started until
such time as a valid breath sample is given
*With No sample the LED flashes all the time.
*With a valid breath sample the LED turns OFF.
The sample results will be
recorded on the VBS non
volatile memory together
with date and time
The sample results will be
recorded on the VBS non
volatile memory together
with date and time
Should the driver
still want to start the engine
he will need to re-submit
a new breath sample
into the WAB
When the random sequence is activated
(internally by Software)
The buzzer will sound for “XX” minutes
(if a valid breath sample is given
the buzzer will be silenced)
While in drive mode the
VBS random retest timer
starts running thus at
random requests the
driver to present a
valid breath sample
Random
Retest
selected
This feature is
programmed
in
or
out
at installation as
per customer
request
}
Valid
breath
sample
Yes
No
DRIVER CHANGE
BUTTON
RANDOM
TEST
PROCEDURE
Yes
No
RED
LED
RED
LED
DRIVER CHANGE
BUTTON
Failure to provide a breath sample for analysis during random
testing or providing a sample that exceeds the predetermined
level, will not cause the vehicle to stop, however, failure to
provide a breath sample or providing a sample that exceeds the
predetermined level will cause a non event to be presented at
the GSM Output to be sent if the GSM Module is connected.
This non event will be recorded by the VBS as well.
When the vehicle ignition is
turned off the VBS will remain
unblocked allowing the vehicle
to be restarted within preset
time period of “XX” minutes.
This time period is set at
installation.
WAB 10
0
If a Driver Change is required, follow
the Driver Changing sequence
as described on page 4.
Lion Laboratories
Summary of Contents for WAB 100
Page 1: ......
