background image

 

 

P. 6 

Installation Guide

0

 

MODE 2

  

* INDICATES DEFAULT SETTING

 

FUNCTION 1 – Re-lock 

OPTION 1 

Disabled 

OPTION 2* 

Enabled – Relock all doors 60 seconds after unlocking and no door nor trunk is  

 opened 

FUNCTION 2 – Siren / Horn Chirps 

OPTION 1 

Warning chirp only – Lock confirmation if Lock button is pressed more than once 

 

- 3 chirps if a door is opened and Lock button pressed 

  

- 4 chirps if Unlock button is pressed and an intrusion occurred  

OPTION 2* 

Chirp enabled 

OPTION 3 

Chirp enabled with open-zone notification  

 

(Siren / Horn warning 10sec after arming if a door is opened) 

OPTION 4 

Chirp disabled – Lock confirmation if Lock button is pressed more than once 

FUNCTION 3 – Arming 

OPTION 1 

Active arming 

OPTION 2* 

Passive arming – 60 seconds rearm 

OPTION 3 

Passive arming – 60 seconds rearm. No TWO-STAGE disarm. 

OPTION 4 

Active arming with disarm notification (ignition ON to OFF, door opened and then closed) 

FUNCTION 4 – Ignition monitoring with Siren / Horn mode 

OPTION 1 

Siren mode with ignition monitoring disabled 

OPTION 2* 

Siren mode with ignition monitoring enabled 

OPTION 3 

Horn mode with ignition monitoring disabled 

OPTION 4 

Horn mode with ignition monitoring enabled 

FUNCTION 5 – Negative trigger 

OPTION 1 

Ignition and shock bypass under remote start. 

OPTION 2* 

Trigger alarm input 

 

Siren / Horn Chirp Duration Adjustment 

The default horn chirp duration is 25 ms. In order to adjust the timing for the Siren, select MODE 2 – 
FUNCTION 4 – OPTION 1 or 2. To adjust the timings for the Horn, select MODE 2 – FUNCTION 4 – OPTION 3 
or 4. The siren/horn chirp duration can be configured by following these steps: 

1.

 

Flash the hood pin switch (see on page 4) - the parking lights will stay on for up to 20 seconds. 

2.

 

Within 20 sec. press and hold the valet button. 

3.

 

Press the 

 

 button to enter horn chirp duration adjustment – Siren or Horn will chirp 5 times. 

4.

 

Proceed as follows to change the horn chirp duration: 

a.

 

Every time you press the 

 

button, the system will 

increase

 

horn chirp duration by 

3 ms. When chirp duration reaches its maximum value (250 ms the siren / horn will 
sound 1 long chirp. 

b.

 

Every time you press the 

 

button, the system will 

increase

 

horn chirp duration by 

10 ms. When chirp duration reaches its maximum value (250 ms) the siren / horn will 
sound 1 long chirp. 

c.

 

Every time you press the 

 

button, the system will 

decrease

 

the horn chirp duration 

by 3 ms. When chirp duration reaches its minimum value (10 ms), the siren / horn will 
sound 1 long chirp. 

d.

 

Every time you press the 

 

button, the system will 

decrease

 

the horn chirp duration 

by 10 ms. When chirp duration reaches its minimum value (10 ms), the siren / horn will 
sound 1 long chirp. 

e.

 

To save the settings and exit horn chirp duration adjustment, press the 

 + 

 

buttons simultaneously (or the press 

 button on the two-way remote). The siren / 

horn will sound 3 chirps. Then turn the ignition key to the 

OFF

 position. 

 

Note

: As a rule, you will hear only one short chirp for each adjustment of the horn chirp duration. Nevertheless, 

you will hear a long chirp (approx. 1 second long) if either the minimum value (10 ms) or maximum value 
(250 ms) is reached. 

Summary of Contents for ASL-300









Reviews: