7
Installation
Mounting the Camera and Extrusion
A camera mounting plate must be fitted between the head support and
the camera body to allow installation of the prompter system.
1.
Fit the MT-RED
mounting plate to the
camera support.
2.
Fit the mounting plate
for the camera being
used to the top of the
MT-RED mounting
plate, using the fixing
screws provided.
3.
Firmly clip the camera
into position on the
mounting plate.
4.
Undo the clamps securing the telescopic rods. If necessary, slide
the rods forwards to improve access.
WARNING!
Before attempting to install or adjust the
prompter assembly, the tilt axis of the head support must be
securely locked horizontally (tilt axis).
Summary of Contents for ELP 15 PLUS
