Installation instruction and calibration
Make sure to keep the following in mind before installation.
• Installation shall be made on even flat ground with the car engine turned off.
• Please check the necessary components enclosed in the product kit and follow the installation
instruction step by step.
• This manual describes how to install K15 in a car by car type: passenger car, SUV, Bus and truck.
For buses and trucks, except for the installation position, the procedures are similar with those
for passenger cars. You can find details later in this manual.
• After successfully installing the camera, drive on a even, straight road to receive GPS signals
(this will take up to 5 minutes). When you drive over 30 mph, you will hear a recorded voice
“The Land Departure Warning System has been calibrated.” In re-calibrations another voice
message explains “Recalibration has started.” After the voice messages all functions will
normally operate.
• If K15 performs incorrectly please reinstall it according to the installation instruction.
