Installation instruction and calibration
Caution
Reset calibration when the main body angle is altered or the car model is changed due to car replacement.
Reset calibration when LDWS/FCWS alert doesn’t work properly.
9. When the previous steps are completed, power up the engine to provide power to the product.
Check if the monitor connected for video-out function is normally working.
Virtual line
Calibration lines
Horizon
Horizon and yellow
Calibration lines match
Step 1: Selecting car model
Select car model.
Car models: car, SUV, large van, bus (see page 17 in the manual)
Step 2: Adjust horizontal and calibration line
Park the vehicle in a place with open front space and flat ground.
Match the horizontal line(where the red dotted lines meet)
to the yellow calibration line marked on the monitor and fix
the angle adjusting bolt firmly.
Calibration line is visible only when setting calibration(LDWS initialization).
Step 3: GPS reception
Audio guide is on when GPS reception is complete.
Step 4: Position adjustment (calibration)
When audio guide informs completion of GPS reception, start operation for calibration.
Audio guide will inform that calibration is complete after driving for 1~3 minute over 30mph on a straight
road with a single fine line on both sides.
All functions work normal after the audio guide
