Autopage RF-525, Operation Manual

Page: 5 / 20

This is useful if you want to disable the transmission function of the LCD remote
control to temporarily prevent from any inadvertent pressing of buttons by others.
The 2-way remote control transmitter:
Press the button first, within 3 seconds press and
hold the (
)
button for 2 seconds to activate or cancel
the button lock function.
The icon will be displayed on the LCD screen to
confirm that the LCD remote transmitter is in the “Button
Lock” mode
.
LED display:
LED Function LED Function
Off Disarmed Zone 1 / Warn-Away Trigger
Slow Flash Armed 2 flashes... pause Zone 2 / Trigger on Trunk/Hood
Fast Flash Passive Arming 3 flashes... pause Zone 3 / Trigger on Door Switch
On (Solid) Valet Mode 4 flashes... pause Zone 4 / Trigger on Shock Sensor
5 flashes... pause Zone 5 / Trigger on Ignition Switch
CHIRP INDICATORS: PARKING LIGHT:
Chirp Function Parking light Function
1 chirp Arm 1 flash Arm
2 chirps Disarm 2 flashes Disarm
3 chirps Defective Reminder 3 flashes Disarm / Triggered
4 chirps Disarm / Triggered 12 flashes Car Locator
6 chirps Car Locator
ALARM OPERATING CONDITION:
Siren /
Horn Parking
Light
LED Doors Starter Dome Light
1. Arming
1 or 3
Chirps
1 Flash
Slow
Flash
Locking Disable
2. Disarming
2 or 4
Chirps 2 or 3
Flashes
Unlocking Turns on for 30 -sec
3. Trigger Alarming Flashes
Slow
Flash
Disable Flashes
4. Panic Alarming Flashes Flashes
5. Car Locator 6 Chirps 12 Flashes Locking
ACTIVE ARMING – LOCK & ARM:
5