Autopage CAR-PRO CPX-2350 Operation Manual Download Page 5

First timer: 

a.  50 seconds after the system has been triggered. The siren will start 

chirping for 15 seconds.  

b.  During this 15 seconds period of chirping, you will be alerting to  push 

the valet switch once to turn off the car-jacking feature.  

c.  If not, it will enter second timer car jacking. 

Second timer:  

65 seconds after the system has beer triggered. The siren starts 
alarming and the parking light starts flashing.  

Third timer:  

90 seconds after the system has been triggered  

a.  The siren still alarming and the parking light flashing, and  
b.  The starter disable will activate to prevent the vehicle from starting. 
c.  It will remain active until the vehicle's battery power exhausted.  

  

OVERRIDE THE SYSTEM TO TURN OFF CAR JACKING: 

Turn the ignition switch from OFF to ON, and within 10 seconds push 

valet switch, the siren will stop and the system disarmed 

 
IGNITION CONTROL DOOR LOCKS. 

(Programmable) 

If the vehicle’s door locks have been interfaced to the security system, the 
system will automatically lock the vehicle's doors when the ignition is turned 
“ON” and /or unlock the vehicle’s doors when the ignition is turned “OFF”. 
 

TRUNK RELEASE.  

Press and hold 

 

 

button on transmitter for three seconds to remote 

control the trunk release or other electric devices. 

 
CAR LOCATOR  

Press the 

 

 

button

 

on the transmitter while the system is armed to active 

car locator function. The siren will chirp 6 times. The parking light will flash 
12 times, allowing you to easily locate your car.

  

 

PROGRAMMING THE REMOTE TRANSMITTER 

Enter:   

1.  Turn the Ignition ‘switch ‘OFF/ON’ 3 TIMES and stay in ON  
position. Within 15 seconds. 
 
2. Push the Valet switch 

2 times

. (Holding in on the 2nd push) until you hear a long 

chirp. The transmitter is ready to program. 

Program: 

1.  Press any button on 

  the transmitter until the horn responds with a confirming 

chirp the first transmitter is now programmed.   

2. Press button on the second transmitter until  the horn responds with a confirming    
chirp, the second transmitter is now programmed.  
 

Exit: 

Turn Ignition to ‘OFF’ position, or leave it for 15 seconds. 3 long chirps & 3 

parking light flashes will confirm exit. 

Summary of Contents for CAR-PRO CPX-2350









Reviews: