Autopage CAR-PRO CPX-2350 Operation Manual Download Page 4

2.   Push and hold valet switch for 2 seconds or until the LED turns on. 

The LED will remain on as long as the system is in 'valet mode'.  

  Exit Valet Mode: 

1.  Return to normal operation, turn ignition 'ON'.  
2.  Push and hold valet switch for 2 seconds; the LED will turn off 

indicating the system is exiting the valet mode.  

 

PANIC FUNCTION:  

The transmitter can be used as a remote panic switch to manually trigger 
the alarm in case of emergency.  

1.  Press and hold the 

 

 

button on the transmitter for 3 seconds. The 

alarm will immediately    sound.  

2.  To stop the alarm, press and hold 

 

button on the transmitter, the 

panic mode will be turned off immediately. 

3.  If the button is not pressed, the alarm will automatically stop after 30 

seconds. 

 

TRIGGER THE SYSTEM  

When armed, your vehicle is protected as follows: 
1. Light impacts will trigger the warn-away signal. A long chirp  from 

siren/horn.  

2. Heavy impacts / Doors open / Hood open / Trunk open / Turning on the 

ignition switch- All will trigger the programmed sequence.  

The starter disable relay (if installed) prevents the vehicle’s starter from 
cranking. The siren and parking lights will turn on to alert of an intrusion for 
30 seconds. Then the siren will stop and automatically reset and re-arm. If 
any the sensors or detectors are still active, the alarm system will sound a 
maximum of six-30 second cycles. 

 
ANTI CAR-JACKING  

Warning: 

If you don't need the car jacking function in this alarm system, be 

sure to set car jacking feature “OFF”. This system is default setting Car-
jacking “OFF”. (Programmable) 

 
1. TRANSMITTER  ACTIVATE THE  CAR JACKING:  

Press and hold 

 

 

button on the transmitter for  1 second while the 

vehicle’s ignition is ON.  The parking light wills turns on for 1.5” seconds 
to indicate car jacking activated.  
 

2. DOOR SWITCH  ACTIVATE CAR JACKING:  

1. Turn the ignition switch to “ON” position, the system is armed. 
2. Once the system is armed, if you are forced from the vehicle, the system 

will active the car jacking trigger when the door is opened and closed 
while the ignition is “ON” 

TRIGGER THE CAR JACK MODE: 

3-timer circuits will function as follows: 

Summary of Contents for CAR-PRO CPX-2350









Reviews: