Trademark
AUTOOL Technology Co, Ltd. has registered its trademarks in
several countries including China, the trademark is . With
regard to the other trademark, service logo, domain name, icon
and company name mentioned in this manual, they shall all
belong to AUTOOL and its other affiliated company, in other
countries without the registration yet of these trademark, service
logo, domain name, icon and company name of AUTOOL, here
we announce they are owned by AUTOOL. Any company or
person shall not use the trademark, service logo, domain name,
icon and company name of AUTOOL before getting approved by
AUTOOL with written certificates. Please visit our website
www.autooltech.com or email to [email protected] to
contact us.
1
Caution and Precautions
All maintenance and repair work must be carried out with the
power supply completely cut off. Please confirm that the power
plug has been disconnected before opening the case.
During the warranty period, if the user erroneously overhauls
the products without the proper guide by the AUTOOL, the
AUTOOL company will not be responsible for the caused
breakdown and free maintenance.
All connection operations shall be performed after the user
confirms that the power has been turned off. The correct order
is to connect the welding gun wire and the ground wire to the
welding machine first, confirm that the ground wire connection
is firm, finally plug the power plug into the power supply.
•
•
•
