-|Transparent Guide|-
TCD210234AE
Safety Grip Type
Enabling Switch
es
SFEN Series
PRODUCT MANUAL
For your safety, read and follow the considerations written in the instruction
manual, other manuals and Autonics website.
The specifications, dimensions, etc. are subject to change without notice for product
improvement. Some models may be discontinued without notice.
Features
• Models: Standard / Stop button / Momentary button type
• High operation sensitivity with 3-position snap action
• Enable operation indicator (green LED)
• Various contact types
: Standard type N.O. 2 + N.C. 1
: Stop button type N.O. 2 + N.C. 2
: Momentary button type N.O. 2 + N.O. 2
• Secure connection with cable gland
• Holding key SFEN-HK (sold separately)
: for connection with safety door switch (SFD Series)
GB/T14048.5
01. Fail-safe device must be installed when using the unit with machinery that may
cause serious injury or substantial economic loss. (e.g. nuclear power control,
medical equipment, ships, vehicles, railways, aircraft, combustion apparatus,
safety equipment, crime/disaster prevention devices, etc.)
Failure to follow this instruction may result in personal injury, economic loss or fire.
02. System manager means followings;
- a personnel who is fully aware of installation, setting, operation, and
maintenance of the product
- a personnel who well observes standard/regulation/statute on the product by
type of machine the product installed in and nation/region the product used
in Machine user means a personnel who is appropriately trained about using
machine by the system manager, so that machine user can operate the machine
correctly.
System manager has duty to train the machine user about operation of the
product.
Machine user has to report directly to the system manager when unusual status
has been found while system is operating.
Failure to follow this instruction may result in personal injury, economic loss or fire.
03. The product has to be installed, set, and combined with machine control system
by the qualified system manager.
Failure to follow this instruction may result in personal injury due to unintended operation
and unstable detection.
04. Before using the product, check that function of the product operates as intended
while machine is turned off after installation.
Failure to follow this instruction may result in personal injury due to unintended operation
and unstable detection.
05. This product is a switch used to perform maintenance and repair of machines such
as robots in the safe area. Configure the system to operate only in position 2 so
that the machine can only be operated when the switch is operated. Also, do not
maintain position 2 by any means other than manual manipulation.
Failure to follow this instruction may result in personal injury due to malfunction of the
product and safety function.
06.
Do not use the unit in the place where flammable/explosive/corrosive gas, high
humidity, direct sunlight, radiant heat, vibration, impact, salinity, moisture, steam
or dust may be present.
Failure to follow this instruction may result in explosion or fire.
07. Do not connect, repair, inspect, or replace the unit while connected to a power
source.
Failure to follow this instruction may result in personal injury due to malfunction of the
product and safety function.
08. Do not disassemble or modify the unit.
Failure to follow this instruction may result in personal injury or fire due to loss of safety
function.
09. Do not drop or impact the product.
Failure to follow this instruction may result in personal injury due to continuous machine
operation when the product is damaged.
10. Do not use the door switch with only the holding key inserted.
Failure to follow this instruction may result in personal injury after switch is disabled.
11.
Configure the switches to be inoperable in the status of the enabling switch with
the holding key insurted into the door switch.
12. Do not defeat, tamper, modify, or bypass the switch and enter the door.
Failure to follow this instruction may result in personal injury.
13. Check whether machine is stopped or not when the door is opened.
Failure to follow this instruction may result in personal injury.
14. Check the installed status of the switch, operating status of the switch, and signs
of damage, modification, tampering of the switch at the following situation and
on a weekly basis.
- when operating the safety system at first
- when replacing component of the system
- when the system has not been operated for a long time
Failure to follow this instruction may result in personal injury due to malfunction of the
product and safety function.
Safety Considerations
•
Observe all ‘Safety Considerations’ for safe and proper operation to avoid hazards.
•
symbol indicates caution due to special circumstances in which hazards may occur.
Warning
Failure to follow instructions may result in serious injury or death.
