-|Transparent Guide|-
Product Components
• Product
• Bracket × 2
• Instruction manual
• Terminal cover × 1
Cautions during Wiring
•
Unit: mm, Use terminals of size specified
below.
• Input and output are insulated from the
power.
≥3.0
≤6.0
ADC input
circuit and
display part
Option output
and
hold / zero
Power
1
3
2
4
5
7
6
8 9
10
Dimensions
• Unit: mm, For the detailed drawings, follow the Autonics website.
91.5
48
44.4
96
4 20
■
Bracket
■ Panel cut-out
22
36
3
4.9
≥ 116
≥ 52
92
+0.8
0
45
+0.6
0
■
Terminal cover
15.5
15.9
93.7
Ordering Information
This is only for reference, the actual product does not support all combinations.
For selecting the specified model, follow the Autonics webstie.
MX 4 W
-
❶
-
F
❷
❶ Input type
V: DC / AC voltage
A: DC / AC current
❷ Preset output
N: Indicator
1: NPN open collector
2: PNP open collector
Connections
■ Input
• For using DC power, connect wires regardless of polarity.
• Indicator model does not have the hold / zero terminal.
HOLD / ZERO
SOURCE
24 - 240 VACᜠ/ VDCᜡ
①
②
③
COM
1
2
3
4
5
6
7
8
9
10
MX4W-V-
F□
MX4W-A-
F□
①
DC
± 500 mVDCᜡ / ± 200 mVDCᜡ /
± 50 mVDCᜡ
± 20 mA / 4 - 20 mA / ± 5 mA / ± 2 mA
AC
0 - 500 mVACᜠ / 0 - 200 mVACᜠ /
0 - 50 mVACᜠ
0 - 20 mA / 0 - 5 mA / 0 - 2 mA
②
DC
± 20 VDCᜡ / ± 5 VDCᜡ / 1 - 5 VDCᜡ /
± 2 VDCᜡ
± 500 mA / ± 200 mA / ± 50 mA
AC
0 - 20 VACᜠ / 0 - 5 VACᜠ / 0 - 2 VACᜠ
0 - 500 mA / 0 - 200 mA / 0 - 50 mA
③
DC
± 500 VDCᜡ / ± 200 VDCᜡ / ± 50 VDCᜡ
± 5 A / ± 2 A
AC
0 - 500 VACᜠ / 0 - 200 VACᜠ /
0 - 110 VACᜠ / 0 - 50 VACᜠ
0 - 5 A / 0 - 2 A
■ Output
•
1: NPN open collector
COM
OUT2
OUT1
1
2
3
4
HOLD/
ZERO
•
2: PNP open collector
COM
OUT2
OUT1
1
2
3
4
HOLD/
ZERO
Specifications
Model
MX4W-V-
F□
MX4W-A-
F□
Input type
DC / AC voltage
DC / AC current
Max.
allowable
input
Dependent on the input type
+DC input
≈ -10 to 110 % F.S. for each measured input range
-DC input
≈ -110 to 110 % F.S. for each measured input range
AC input
≈ 110 % F.S. for each measured input range
Display method
12-segment LCD
01)
-
measurement value display part
: white, character height: 19 mm
-
other display parts
: red, green, yellow (indicator: white)
Display accuracy
Dependent on the ambient temperature
23 ± 5 ℃ (DC input)
± 0.1 % F.S. rdg ± 2-digit
± 0.1 % F.S. rdg ± 2-digit
02)
23 ± 5 ℃ (AC input)
± 0.3 % F.S. rdg ± 3-digit
± 0.3 % F.S. rdg ± 3-digit
0 to 50 ℃
± 0.5 % F.S. rdg ± 3-digit
± 0.5 % F.S. rdg ± 3-digit
03)
Display cycle
0.2 to 5.0 sec (select per 0.1 sec)
Display scale
-9999 to 9999 (4-digit)
A / D
conversion method
ΣΔ (Sigma Delta) analog-to-digital converter
Sampling cycle
(DC input)
50 ms
Sampling cycle
(AC input)
16.6 ms
Resolution
1 / 20,000
P
reset output
NPN / PNP open collector output model
Load voltage
≤ 30 VDCᜡ
Load current
≤ 100 mA
Residual voltage
NPN open collector output: ≤ 1 VDCᜡ /
PNP open collector output: ≤ 2 VDCᜡ
Unit weight (packaged)
≈ 77 g (≈ 100 g)
Approval
ᜢ ᜧ
01) When using the unit at low temperature (below 0 ℃), display cycle is slow due to charateristics of LCD. Control
output operates normally.
02) 5 A
terminal
: ± 0.3 % F.S. rdg ± 3-digit
03) 5 A
terminal
: ± 1 % F.S. rdg ± 3-digit
Power supply
24 - 240 VDCᜡ ± 10 %, 24 - 240 VACᜠ ± 10 % 50 / 60 Hz
Power consumption
DC: ≤ 3 W, AC: ≤ 5 VA
Insulation resistance
≥ 100 MΩ (500 VDCᜡ megger)
Dielectric strength
B
etween all terminals and case: 3,000 VACᜠ 50 / 60 Hz for 1 min
Noise immunity
± 2 kV square wave noise (pulse width: 1
㎲) by the noise simulator
Vibration
0.75 mm double amplitude at frequency of 10 to 55 Hz (for 1
minute) in each X, Y, Z direction for 2 hours
Vibration
(malfunction)
0.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 minute)
in each X, Y, Z direction for 10 min
Shock
300 m/s
2
(≈ 30 G) in each X, Y, Z direction for 3 times
Shock (malfunction)
100 m/s
2
(≈ 10 G) in each X, Y, Z direction for 3 times
Ambient temperature
-10 to 50 ℃, storage: -20 to 60 ℃ (no freezing or condensation)
Ambient humidity
35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation)
Insulation type
Symbol:
,
double or reinforced insulation
(dielectric strength
between the measurement input part and the power part:
1 kV)