5 System Setting Menu
© Copyright Reserved Autonics Co., Ltd.
53
5.3.1.2
I/O Monitoring
Monitor I/O status in LP.
When green light turns ON, I/O status is ON, turns OFF as gray I/O status is OFF.
ON OFF
5.3.2
Project
5.3.2.1
Project Info
Check the information of the project downloaded in current GP.
atDesigner displays the filled out information when the project is created.
5.3.2.2
Screen
Set the contents related to the use screen, such as screen switching device, start screen, boot
screen, screensaver and etc.
Item
Description
Change Screen
by Device
Change Screen by
Device
Set whether to use the screen switching function.
When checked, the sub item is activated.
Window Change Device
Set the device to specify the base screen number
and display the screen corresponding to the
device value.
When the value of the set device is changed, it
moves to the screen number of the device value.
If the input device value does not exist on a base
screen, an error window will occur and the
current screen (current device value) will be
remained.
Current Window Device
Set the word device address to display the
current screen number.
Global Window 1/2
Device
Set the device to specify the window screen
number to display the window screen
corresponding to the device value. .If the value of
the set device changes, the window screen of the
device value is called.
If a non exist window screen number is entered,
the input value will be ignored and the window
screen will not be called.
Start Window No. Start Window No.
After the GP console is booted and the boot
screen is displayed, set the start screen number
of the user screen.
The start screen is the screen that appears when
the GP device is first started or when monitoring
is started after download completion.
Booting Window
Booting Window
Set whether to use the GP console boot screen.
When checked, the sub item is activated.
Window No.
Select the screen number to use as the boot
screen in the base screen of the project.
Delay
Set the delay time of the boot screen.
The unit is seconds.
Screen Saver
Screen Saver
Set whether to use the GP screen saver.
When checked, the sub item is activated.
Summary of Contents for LP-A Series
