KT-502H
G-4
Fid dev output 20.000
mA equal to reference
meter ?
1. Yes
2. No
ABORT ENTER
NOTE-Loop may be
returned to automatic
control
ABORT
O K
Device Disconnected
RETRY
QUIT
1. Offline
2. Online
3. Frequency Device
4. Utility
Setting fid dev.
output to 20mA
ABORT
O K
Enter meter Value
20.000
HELP
DEL
ABORT ENTER
Diag/Service
1. Test device
2. Loop test
3. Calibration
4. D/A trim
HELP
SAVE
HOME
⑫
Press the
(F4) key.
⑬
Press the
(F3) key.
⑭
Press the
(F3) key.
⑮
Press the (F3) key to complete the adjustment.
⑪
If output display value is correct, select
'1. Yes'
and press
the
(F4) key. If not, select
'2. No'
and press the
(F4) key and re-set the display value.
⑨
Press the
(F4) key.
⑩
Press the
(F4) key to set 20 mA display value.
Current Trim Adjustment
1. Device Setup
2. PV
3. PV Ao
4. PV LRV
5. URV
1. Process Variables
2. Diag/Service
3. Basic Setup
4. Detailed Setup
5. Review
1. Test device
2. Loop test
3. Calibration
4. D/A trim
Connect reference
meter
ABORT
O K
Fid dev output 4.000
mA equal to reference
meter ?
1. Yes
2. No
ABORT ENTER
Enter meter Value
4.000
HELP
DEL
ABORT ENTER
Setting fid dev
output to 4mA
ABORT
O K
WARN-Loop should be
removed from
automatic control
ABORT
O K
①
Select the
'1. Device Setup'
by
,
keys and press the
key.
Connect a HART communicator and adjust current trim as below by a HART communicator.
②
Select the
'2. Diag/Service'
by
,
keys and press the
key.
③
Select the
'4. D/A trim'
by
,
keys and press the key.
④
Press the
(F4) key.
⑤
Press the
(F4) key.
⑥
Press the
(F4) key.
⑦
Press the
(F4) key to set 4 mA display value.
⑧
If output display value is correct, select
'1. Yes'
and press
the
(F4) key. If not, select
'2. No'
and press the
(F4) key and re-set the display value.
Ex)If output display value is 3.89mA, select 3.89 and press
the
(F4) key.