Autonics ADIO-EI, Product Manual

Page: 10 / 10

18, Bansong-ro 513Beon-gil, Haeundae-gu, Busan, Republic of Korea, 48002
www.autonics.com | +82-2-2048-1577 | sales@autonics.com
-|Transparent Guide|- -|Transparent Guide|-
■ Mode specifications
Mode Digital Input
Number of channels 16-CH (I/Q: 8-CH, C/Q:8-CH)
I/O common NPN / PNP
Input current 5 mA
ON voltage/current
Voltage: ≥ 15 VDCᜡ
Current: ≥ 5 mA
OFF voltage ≤ 5 VDCᜡ
Mode Digital Output
Number of channels 8-CH (C/Q)
I/O common NPN / PNP
Power supply 24 VDCᜡ (18 - 30 VDCᜡ), Max. 300 mA
Leakage current ≤ 0.1 mA
Residual voltage ≤ 1.5 VDCᜡ
Short circuit protection YES
Mode IO-Link
Input current 2 mA
ON voltage/current
Voltage: ≥ 15 VDCᜡ
Current: ≥ 2 mA
OFF voltage ≤ 5 VDCᜡ
■ Environmental conditions
Ambient temperature 01)
-5 to 70 °C, Storage: -25 to 70 °C
(no freezing or condensation)
Ambient humidity 35 to 75%RH (no freezing or condensation)
Protection rating IP67 (IEC standard)
01) UL approved ambient temperature: 45 ℃
■ Approvals
Approval ᜢ ᜨ ᜣ
Association approval
ᜬ ᜻
■ Electrical/Mechanical specifications
Supply voltage 18 - 30 VDCᜡ
Rated voltage 24 VDCᜡ
Current consumption 2.4 W ( ≤ 216 W)
Supplying current per port ≤ 2 A/Port
Sensor current (US) ≤ 9 A
Dimensions W 66 × H 215 × D 38 mm
Material Zinc Die casting
Ethernet port
M12 (Socket-Female), 4-pin, D-coded, Push-Pull
Number of ports: 2 (IN/OUT)
Supported function: daisy chain
Power supply port
Input: 7/8” (Plug-Male), 5-pin
Output: 7/8” (Socket-Female), 5-pin
Number of ports: 2 (IN/OUT)
Supported function: daisy chain
PDCT port
M12 (Socket- Female) , 5-pin, A-coded, Push-Pull
Number of ports: 1
Connection method: USB serial communication
I/O port
M12 (Socket-Female), 5-pin, A-coded, Push-Pull
Number of ports: 8
Mounting method Mounting hole: fixed with M4 screw
Grounding method Grounding hole: fixed with M4 screw
Unit weight (packaged) ≈ 700 g (≈ 900 g)
Specifications Communication Interface
■ Ethernet
Version 1.1
Transmission rate COM1 : 4.8 kbps / COM2 : 38.4 kbps / COM3 : 230.4 kbps
Port class Class A
Standard
IO-Link Interface and System Specification Version 1.1.2
IO-Link Test Specification Version 1.1.2
■ IO-Link
Ethernet standard 100BASE-TX
Cable spec. STP (Shielded Twisted Pair) Ethernet cable over Cat 5
Transmission rate 10 / 100 Mbps
Cable length ≤ 100 m
Protocol EtherNet/IP
Address settings Rotary switches, DHCP, BOOTP, atIOLink
Factory settings
• IP Address: 192.168.2.3
• Subnet Mask: 255.255.255.0
• Gateway Address: 192.168.2.1
EDS file Download the EDS file at the Autonics website.