AUTOMOBILI LAMBORGHINI Mobility AL1, User Manual

Page: 19 / 313

17
For your own safety, wear a helmet and knee pads to protect yourself from any falls and
injuries.
The rider assumes all risks for not wearing a helmet or other protective gear.
• When you use it for the first time, charge the e-scooter to 100%. Check the battery
indicator; if the battery is low, recharge it before use. The e-scooter is a
device that requires periodic recharging in order to function.
• Place the electric scooter on a flat surface.
• Put your hands on the handlebar. Step onto the footboard with one foot and use
the other to give yourself a gentle push off.
For safety reasons, the electric scooter is initially set up to avoid a standing start.
• When the electric scooter begins to move, place both feet on the footboard and press
the accelerator. Note: the accelerator is activated once the forward speed exceeds 3 km/h.
• To ride the electric scooter, tilt your body in the direction of travel when turning and
slowly turn the handlebar.
• To stop the electric scooter, release the accelerator, press the electronic brake on the
left hand side of the handlebar and if necessary press the rear mudguard with your foot.
• Before getting off, bring the electric scooter to a complete stop. Trying to get off the
electric scooter while it is in motion can cause injury.
• When changing mode, single click the power button to change the speed mode.
• When driving at night or in dark places, double click the power button to turn on the
lights, and wear a reflective vest.