troubleshooting of your MPPT charge controller.
Wiring
The three output wires from the wind turbine are Blue / Red / Black and
transform three-phase AC. The three wires need to be connected to the
“RST” terminal located on the back of the digital MPPT charge controller.
(Three phase power is a method of electric power transmission using three
wires). The Manual stop switch is pre-wired for your convenience with
10 AWG wire and battery terminal connections. Place the corresponding
wires (red, black, blue) from the Manual stop switch into the MPPT input
terminals. This should match the similar colored wires from your turbine.
Your turbine and stop switch share input terminals on the MPPT. This
provides a parallel connection. (see figure below).
33
ON
OFF
Red Lead
B
lue Lead
B
lack Lead
Red Lead
Red Lead (R)
Blue Lead
Black Lead
White Lead (T)
Black Lead (S)
Turbine
Manual Stop Switch
R
S
T
Summary of Contents for 600 Watts Wind Turbine
Page 1: ...User s Manual 600 Watt Windmill 12V 24V Version 2021 Apr...
Page 43: ......
