AUTOMATOR INTERNATIONAL SRL
–
Via Meucci n.8
–
20094 Corsico (Mi) Italia
Tel 02 48601445 Fax 02 48601503 e-mail [email protected] www.automator.com
Tel 02 48601445 Fax 02 48601503 e-mail info@automator. Com www.automator.com
Tel 02 48601445 Fax 02 48601503 e-mail info@automator. Com www.automator.com
Document
INSTRUCTION FOR USE
Code:
MAN MBVPREV3
Ediz.n: 4
Del: 03/2012
Pag. 18/26
Edited by: U.T. VB
1.1.1.1.1.1
.
Appr. by: RB.
Machine:
VP UNITS
3.3.4 MARKING FORCE ADJUSTMENT
To regulate the marking force, turn the impact adjusting nut (Ref. 12)
clockwise to increase the force; counter-clockwise to decrease it. .
The unit is delivered with some impact springs of different thickness . To
replace the impact spring inside the unit with a different one, remove the
impact adjusting nut (Ref. 12) and the impact spring (Ref.10). Then place
the alternative spring inside the upper sleeve (Ref.8) and replace and tighten
the impact adjustment nut (Ref. 12).
Do not use the impact spring completely loaded, but use the
impact spring with a bigger thickness at a lower charge
