8
Tech Support 770-844-4200
www.productivity1000.com
Document Name
Edition/Revision
Date
P1-4ADL2DAL-1-DS
1st Edition
5/18/2018
Copyright 2018, AutomationDirect.com Incorporated/All Rights Reserved Worldwide
Terminal Block Specifications
Part Number
P1-10RTB
P1-10RTB-1
Positions
10 Screw Terminals
10 Spring Clamp Terminals
Wire Range
30–16 AWG (0.051–1.31 mm²)
Solid / Stranded Conductor
3/64 in (1.2 mm) Insulation Max.
1/4 in (6–7 mm) Strip Length
28–16 AWG (0.081–1.31 mm²)
Solid / Stranded Conductor
3/64 in (1.2 mm) Insulation Max.
19/64 in (7–8 mm) Strip Length
Conductors
“USE COPPER CONDUCTORS, 75ºC” or equivalent.
Screw Driver
0.1 in (2.5 mm) Maximum*
Screw Size
M2
N/A
Screw Torque
2.5 lb·in (0.28 N·m)
N/A
WARNING:
To minimize the risk of potential safety problems, you should
follow all applicable local and national codes that regulate the installation
and operation of your equipment. These codes vary from area to area and
it is your responsibility to determine which codes should be followed, and
to verify that the equipment, installation, and operation are in compliance
with the latest revision of these codes.
Equipment damage or serious injury to personnel can result from
the failure to follow all applicable codes and standards. We do not
guarantee the products described in this publication are suitable for
your particular application, nor do we assume any responsibility for your
product design, installation, or operation.
If you have any questions concerning the installation or operation of
this equipment, or if you need additional information, please call Technical
Support at 770-844-4200.
This publication is based on information that was available at the time
it was printed. At AutomationDirect.com
®
we constantly strive to improve
our products and services, so we reserve the right to make changes to
the products and/or publications at any time without notice and without
any obligation. This publication may also discuss features that may not be
available in certain revisions of the product.
*Recommended Screw Driver TW-SD-MSL-1
8
Tech Support 770-844-4200
www.productivity1000.com
