Ethernet Communications Modules, 3rd Edition, Rev. D
5-23
Chapter 5: MODBUS TCP for H0/H2/H4-ECOM100
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
In the graphic above, double-click the ECOM100 desired. This will pull up the following
General Settings
box. Here, you can assign the IP address and subnet mask for his network.
The Modbus slaves will need to have compatible settings of course. When finished , click OK
to go back to NetEdit main screen.
For the final steps, you must setup the ECOM100 IP settings and “Peer-Peer” table with
NetEdit3.
