A
pp
en
dix
A
D
ata
Ty
pe
s
&
M
em
.M
ap
A
pp
en
dix
E
D
L3
05
M
em
or
y
M
ap
A--11
DL305 Data Types and Memory Map
DL350 System V-memory
System
V-memory
Description of Contents
Default Values / Ranges
V7620--V7627
V7620
V7621
V7622
V7623
V7624
V7625
V7626
V7627
Locations for DV--1000 operator interface parameters
Sets the V-memory location that contains the value.
Sets the V-memory location that contains the message.
Sets the total number (1 -- 16) of V-memory locations to be displayed.
Sets the V-memory location that contains the numbers to be displayed.
Sets the V-memory location that contains the character code to be displayed.
Contains the function number that can be assigned to each key.
Reserved
Reserved
V0 -- V3777
V0 -- V3777
1 -- 16
V0 -- V3777
V0 -- V3777
V-memory for X, Y, or C
0,1,2,3,12
Default=0000
V7630--V7632
Reserved
--
V7633
User defined timer interrupt/operation of battery/Binary instruction sign flag*
Bit 0--7
40H Setting Interrupt
Bit 12
ON with battery sign flag. ON use sign flag --
OFF no sign flag
Bit 15
Binary instruction sign flag. ON use sign flag --
OFF no sign flag
V7634
User defined timer interrupt
V7640
Loop Table Beginning address
V1400--V7340
V7641
Number of Loops Enabled
1--4
V7642
Error Code -- V--memory Error Location for Loop Table
V7643--V7647
Reserved
V7650
Port 2 End--code setting Setting (A55A), Nonprocedure communications start.
V7651
Port 2 Data format --Non--procedure communications format setting.
V7652
Port 2 Format Type setting -- Non--procedure communications type code
setting.
V7653
Port 2 Terminate--code setting -- Non--procedure communications Termination
code setting.
V7654
Port 2 Store V--mem address -- Non--procedure communication data store
V--Memory address.
V7655
Port 2 Setup area --0--7 Comm protocol (flag 0) 8--15 Comm time
out/response delay time (flag 1)
V7656
Port 2 setup area -- 0--15 Communication (flag2, flag 3)
V7657
Port 2 setup area -- Bit to select use of parameter
V7660--V7707
Set--up Information
V7710--V7717
Reserved
V7720--V7722
Locations for DV--1000 operator interface parameters.
V7720--V7722
V7720
V7721
Titled Timer preset value pointer
V7720
V7721
V7722
Title Counter preset value pointer
V7722 HiByte-Titled Timer preset block size, LoByte-Titled Counter preset block size
V7730--V7737
For slot 0 to 7 D3--DCM
V7747
Location contains a 10ms counter. This location increments once every 10ms.
V7750
Reserved
