Automatic Systems RSB 76E Technical Manual Download Page 8 | Manualshive

Page: 8 / 33

Automatic Systems RSB 76E Technical Manual Download Page 8

The  informat ion  conta ined  in  th is  docu ment  is  the  property  of  Automatic  Syst ems  and  is  conf ident ial .  The  recip ient  shall  refr ain  from  us ing  it  for  any  purpose
other  than  the  use   of  the   produ cts  or  t he  e xecut ion  of   the  projec t  to  wh ich   it  refers  and  from  commun icat ing   it  to   th ird  parties   w ithout  wr itten   pr ior  agree m ent
of Automat ic  Systems.

RSB76E-MT-EN

p. 8/33

the possibility of being recovered and processed by an external device (not supplied by

Automatic Systems

).

A

control board

(22, p6) co-

ordinates all the RSB’s activity: management of the move ments,

of the options, processing incoming and outgoing data, etc. This data can also be repatriated
and processed by an external terminal (not supplied by

Automatic Systems

).

The logic board also records and displays the history of the last operations pe rformed as well
as possible defects preventing the obstacle’s movement.

«
...
6
7
8
9
10
...
»

Summary of Contents for RSB 76E


































Reviews:

No comments