9
©
2007 Directed Electronics—all rights reserved
To remote start the vehicle:
1.
Press the single button on the transmitter once.
2.
The parking lights will turn ON constant to confirm remote
start operation.
3.
Once the vehicle has started, it will run for the pre-program-
med period of time (12, 24, or 60 minutes) or until a shut-
down input is triggered. This can be set to minute increments
by your installer.
When you are ready to drive the vehicle:
1.
Insert the ignition key and turn it to the ON
(not the START) position.
2.
Press the brake pedal.
NOTE:
If the brake pedal is pressed before the key is
in the ON position, the engine will shut down.
While the vehicle is running during remote start operation, the sys-
tem will monitor the vehicle and will automatically shut down the
engine if the system receives any of the following shut-down inputs:
■
The brake pedal is pressed.
■
The hood is opened.
■
The shutdown toggle switch is put into the ON position.
■
The pre-programmed run time has elapsed.
■
The single button is pressed once.
G4101A_2007-06.qxd 06/22/07 3:17 PM Page 9