SEATBELT REPAIR GUIDE
Remove the outer shell of the belt
by locating the two tabs on both
sides and pulling away and out
from the belt mechanism. *Note - be
careful not to crack the casing when
removing it.
1. REMOVE THE OUTER SHELL
With the casing off, on either side of
the belt cylinder are plastic covers.
Locate the largest cover and move
onto the next step.
Take the cover off. Depending on
the model, either remove the two
screws or locate the pull tabs and use
a screw driver to carefully separate
the cover from the body. There are a
total of six tabs.
2. LOCATE THE GEAR HOUSING
3. REMOVING THE HOUSING
