Autojack TJ250, Safety And Operating Manual

Page: 6 / 13

TJ250 04
Operation
The owner and/ or operator shall
have an understanding of the
product, its operating characteristics
and safety operating instructions
before operating this device.
Safety information shall be
emphasized and understood. If the
operator is not fluent in English, the
product and safety instructions shall
be read to and discussed with the
operator in the operator’s native
language by the purchaser/owner or
his designee, making sure that the
operator comprehends their contents.
Inspection
a. Visual inspection shall be made
before each use of the jack by
checking for abnormal
conditions, such as cracked
welds, leaks, and damaged,
loose, or missing parts.
b. Other inspections shall be made
as per product operating
instructions.
c. This jack should be inspected
immediately if the jack is
believed to have been subject to
an abnormal load or shock. It is
recommended that this
inspection be made by a
manufacturer’s or supplier’s
authorised repair facility.
d. Owners and/or operators should be
made aware that the repair of this
equipment may require specialised
knowledge and facilities. It is
recommended that an annual
inspection of the product be made
by a manufacturer’s or supplier’s
authorised repair facility and that
any defective parts, safety labels or
signs be replaced with
manufacturers or supplier’s specified
parts.
Damaged Equipment
Any jack that appears to be damaged
in any way, is found to be worn, or
operates abnormally
must be
removed from service until repaired.
It is recommended that necessary
repairs are to be made by a
manufacturer’s or supplier’s authorised
repair facility, if repairs are permitted by
the manufacturer or supplier.
Alterations
Due to the potential hazards
associated with this type of equipment,
no alterations shall be made to the
product.
Attachments & Adapters.
Only attachments and/or adapters
supplied by the manufacturer shall be
used.