AutoFon «Alfa-Mayak»
10
STEP 3 TURN THE BEACON ON
If the beacon is not already on, turn it on by pressing the SOS button
fi ve times (fast). The LED blinks with a series of green fl ashes. After log-
ging in to the GSM network, the device will send the GPRS packet with
the settings to the server. (When the server receives this package, the
inscription
«didn’t communicate»
will change to the inscription -
«to
communicate»
page 11). «The Last State» table will be automatically
populated. The map shows the approximate location of the car accord-
ing to LBS data. On the Commands tab, you can change device settings.
See, the factory setting assumes the transition of the device state to
sleep mode, which is indicated by the absence of LED illumination on the
board. To wake the device, press the SOS button once for 1 second. In the
active state, the device receives commands in real time. If the command
was sent during the sleep of the device, then its execution will occur
at the closest awakening. Undelivered GPRS commands remain in the
queue and will be sent to the device when it resumes communication
in the sequence specifi ed during sending. The Last State tab shows all
the basic settings “AutoFon Alfa-Mayak” and the timing of the Т1 and
Т2 alarm clock. Control of the device (change of operation modes) is
performed through the PA or the application “AutoFon KSA” by the but-
ton “GPRS Commands”.