24
reception of current TV program the unit will first search a new available frequency from
existing database. If none was found, user has to manually perform channel search
procedures either via DVB-
T menu option “Auto Search”.
3. Auto: when signal is weak, after certain seconds AFS period time, for the continuous
reception of current TV program the unit will first search a new available frequency from
existing database. If none was found, unit will automatically perform channel search
procedures after user-defined tuning period time.
*What is AFS? AFS or Auto Frequency Switch is a smart feature that allowing user to watch a
channel when moving between 2 cities/areas where the channel is broadcasted in different
frequencies. For example, channel “ABC” in city A is broadcasted in frequency 474MHz. In city B,
this channel “ABC” is broadcasted in frequency 490MHz. With this feature, when user moving from
city A to city B or vice versa, user can keep watching the channel “ABC” without having lost the
signal neither performing auto search to find the new frequency in city B.
III.1.10
CONAX CA
To access CONAX CA card menu. In this menu, you can check subscription
status, check event status, check token status, change CA PIN, change maturity
rating, get Conax CA information and get CA message.
1. Using [CH
]/[CH
], browse TV Menu to highlight
“CONAX CA” option.
2.
Press [OK] to enter “CONAX CA” menu.
3. Use [CH
]/[CH
] button to browser CONAX CA
menu.
4. Press [OK] to enter highlighted menu.
5. Press [MENU]/[EXIT] to exit.