USER MANUAL TRAVEL CHARGER
13
5 OPERATION
5.1 OPERATING MODES AND ELECTRIC VEHICLE CHARGING PROCESS
Information about the operating modes of the charging station (the state of the connectors and
the charging parameters) are
shown at the display. Also, the display shows data about software
versions, modem number, station number in Autoenterprise billing, mobile network status, etc.
The information shown on the display depends on the software version and may differ from
version to version.
After the supply voltage is applied, the station display
shows information about the software version and the
serial number of the modem.
In case of malfunctions in the operation of the charging
station, you must inform the serial number of the modem
to the service center for diagnostics and restoration of
work.
In standby mode, the display shows information about the
status of the connectors.
In car charging mode, the LCD display shows information
about charging time, voltage level and current amperage.
The "DC Output" indicator flashes green quickly when
the car is ch
arging in DC Mode “CHAdeMO” / “CCS” /
“GB/T DC”. In this case
the LCD display shows
information about charging parameters.
