Software Operations
19 |
P a g e
Software Operations
Manual Stock
-
At the RoboCrib, insert the badge number and PIN. (Note: At least one employee must be setup as a stocker in
the AutoCrib software.)
-
Select the Stock > Manual buttons.
-
Search for the item. Once the item is highlighted, select „Restock‟. (The system will only show items where the
quantity in the RoboCrib is less than the item maximum.)
-
The RoboCrib will prompt the following:
o
Insert the On Hand or Burn Qty to stock. Then, select „OK‟.
Automatic Stock by Tag
-
At the RoboCrib, insert the badge number and PIN. (Note: At least one employee must be setup as a stocker in
the AutoCrib software.)
-
Select the Stock > Auto > Tag buttons.
-
Insert the tag number noted on the Inventory Input Sheet - RoboCrib report.
-
The RoboCrib will prompt the following:
o
“
Is tag complete?
”
„Yes‟
all items on the tag are available for stocking.
„No‟
some, but not all items on the tag are available for stocking.
o
The RoboCrib will turn the platters until the first bin on the Inventory Input Sheet is in front of the door.
Once the door opens, place the appropriate item into the bin.
Close the door to stock the next bin.
NOTE: If the tag is not complete, you will be asked if the part can be fulfilled for each line on the tag.
Physical by Bin
-
At the RoboCrib, insert the badge number and PIN. (Note: At least one employee must be setup as a stocker in
the AutoCrib software.)
-
Select the Physical > Bin buttons.
-
Insert the Crib Number and Bin Number to physical.
-
After the RoboCrib retrieves the bin and the door opens, enter the correct on hand and/or burn quantities.
NOTE: If you make no changes to the physical counts, the system will default to the current on hand and burn
quantities.
Physical All Bins
-
At the RoboCrib, insert the badge number and PIN. (Note: At least one employee must be setup as a stocker in
the AutoCrib software.)
-
Select the Physical > All buttons.
-
When prompted, move the bin door bypass switch to TEST.
-
Physically count the item(s) in the bins and document the quantities on the Physical by RoboCrib report located in
the Reports module (Inventory category) of the AutoCrib software.
Summary of Contents for RoboCrib 2000 E
Page 51: ...Appendix 51 P a g e ...
Page 52: ...Appendix 52 P a g e ...