16
INTERNAL
SWITCHES/CONNECTIONS/SETTINGS/ADJUSTMENTS
Auto Volume Pre-set
Sensitivity Control
Passenger VOX Pre-set
Sensitivity Control
Rider VOX Pre-set
Sensitivity Control
12 Volt Bike Power Lead
Rider’s Headset Lead
Passenger’s Headset Lead
Rider’s Headset Lead
and Connector
12 Volt Power Lead
and Connector
Passenger’s Headset
Lead and Connector
Stereo Music Front/Rear
Fader Pre-set Control
Passenger’s Master
Volume Control
Rider’s Master
Volume Control
Optional Bike-to-bike
Interface Lead -
Connected to Aux 1
Aux 1 pre-set audio output level control
Please note; all adjusters are shown set to
factory settings
which suit most user’s preferences.
The output level pre-set adjustment controls (
by each audio Aux connection
) affects the audio
output level for that Aux connection.
All audio input levels are controlled by the audio devices own volume controls.
SWITCH 1 (Factory setting*)
1 and 2
* OFF
Aux 3 audio is amplified to Rider only.
3 and 4
* OFF
Aux 5 audio is amplified to Passenger only.
Optional Setting
1 and 2
ON
Aux 3 amplified to both Rider and Passenger.
3 and 4
ON
Aux 5 amplified to both Rider and Passenger.
SWITCH 5 (Factory setting*)
1
* ON
Rider or Passenger speech automatically reduces Aux 4 audio by 50%.
2
* ON
when Aux 2 receives audio it automatically reduces Aux audio 4 by 50%.
3
* ON
when Aux 1 receives audio it automatically reduces Aux 2 audio by 50%.
4
* OFF
Automatic Volume control is on (for audio inputs Aux 2 and 4).
5
* ON
when Aux 3 receives audio it automatically reduces Aux 4 audio by 100%.
Optional Setting
1
OFF
Rider and Passenger speech has no effect to Aux 4 audio.
2
OFF
incoming Aux 2 audio has no effect to Aux 4 audio.
3
OFF
incoming Aux 1 audio has no effect to Aux 2 audio.
4
ON
turns Automatic Volume control OFF for improved earplug use.
5
OFF
incoming Aux 3 audio has no effect to Aux 4 audio.
Servicing the headset/power leads
; as you can see from the above photograph these leads can be
unplugged from the main control box and so servicing is easy should you ever damage these leads. If
you prefer to swap the rider and passenger headset leads over you can do this but please always
position the riders lead in the front panel slot that lines up with the rider identification mark on the lid,
as the riders headset with ambient noise sensor must be plugged into the lead that connects to the
rider socket inside the main control unit.
Bike-to-bike interface leads
; the colours of the wires attached to the white connector may vary.
Harder
Softer
More
Less
Rear
Front
Harder
Softer
Lower
Higher
Lower
Higher
Super Pro Auto Instructions 8/5/09 2:24 pm Page 16
