Dometic RM7271 Refrigerator
The refrigerator is equipped to operate on 230v, 12v
or LPG.
The desired power option is selected by means of the
energy selector switch which has four settings; 230v,
12v (DC), LPG and OFF.
12v (DC) Operation
• Set the energy selector switch to 12v -
operating display 12v will illuminate green
to indicate appliance is operating on 12v.
• Use the rotary control knob to set the
temperature in the main refrigerator
compartment.
• If the operating display fails to light then
the appliance is not operating.
230v Mains Operation
• Set the energy selector switch to the 230v setting -
operating display 230v will illuminate green to
indicate the appliance is operating on 230v.
• Use the rotary control knob to set the
temperature in the main refrigerator
compartment.
• If the operating display fails to light then
the appliance is not operating.
LPG Gas Operation
• Before operating the appliance on gas
ensure that the valve on the gas cylinder
is open and that the individual safety valve
for the fridge is open.
• Set the rotary control knob to the
‘MAX’ position.
• Set the energy selector switch to ‘GAS’.
• The ignition process is activated automatically,
accompanied by a ticking sound for
approximately 30 seconds.
• If ignition is successful the display ‘GAS’ will
illuminate yellow indicating that the unit is
operating on gas.
• In the event of a gas fault (e.g. gas cylinder
empty) then the display will flash.
• Use the rotary control knob to set the
temperature in the main refrigerator compartment.
Switching Off The Refrigerator
• Turn the energy selector switch to the ‘OFF’
position. The refrigerator is now switched off.
Please note, if leaving your vehicle for an extended
length of time, (e.g. greater than two weeks) the
energy selector switch should be switched to the
‘OFF’ position.
Dometic RM7271 Refrigerator
T A K E Y O U R S O N A N A D V E N T U R E
28
4188 AT Excel handbook 2011:Layout 1 23/11/10 14:26 Page 28
