11
For Regular Remote Control Transmitter:
1. Prior to pushing any button on the transmitter. Press the
Select II
button first on the standard transmitter.
2. Once II button is pressed the LED on the transmitter will illuminate for
3.5 seconds. While the LED is illuminated, press the button for the
function you want to operate on the standard remote transmitter to
control a second vehicle security system.
For 2-way LCD Remote Control Transceiver:
2nd
Car Operation: While the
“II”
icon display on the LCD screen, you
can remote control and communicate with a second Autopage AM
frequency security system. It has two short “beep” sounds while pressing
any
button of the LCD screen transceiver
1. Press and hold all four remote control buttons
simultaneously unit one long beep is heard. LCD
Programming has now been entered.
2. Within 5 seconds press and hold
button until
two
beeping sounds are heard and the “
II
” icon will display on
the LCD screen to indicate the second transceiver pin code
has been initiated.
3. To exit programming mode, take no action for five seconds.
The remote control will generate two long beeps to indicate
programming mode has been exited.
Back to first Car Operation:
This will allow you to control and communicate with the first vehicles
security system.
1. Press and hold all four remote control buttons simultaneously
unit one long beep is heard. Programming has now been
entered.
2. Within 5 seconds press and hold button until
one
beep
sound is heard.
3. To exit programming mode, take no action for five seconds.
The remote control will generate two long beeps to indicate
programming mode has been exited.
Vibration / Melody Mode:
Vibration mode is useful when you are in a noisy place and it is difficult
to hear the beep sound from the remote control. In this mode the unit will
vibrate if your security system is triggered.
