background image

 

4

 
TRIGGER THE SYSTEM 

When armed, your vehicle is protected as follows: 
1. Light impacts will trigger the warn-away signal. A long chirp from 

siren/horn.  

2. Heavy impacts / Doors open / Hood open / Trunk open / Turning on the 

ignition switch- All will trigger the programmed sequence. 

The starter disable relay (if installed) prevents the vehicle’s starter from 
cranking. The siren and parking lights will turn on to alert of an intrusion for 
30 seconds. Then the siren will stop and automatically reset and re-arm. If 
any the sensors or detectors are still active, the alarm system will sound a 
maximum of six-30 second cycles. 

ANTI CAR-JACKING  

Warning: 

If you don't need the car jacking function in this alarm system, be 

sure to set car jacking feature “OFF”. This system is default setting Car-
jacking “OFF”. (See Alarm Feature 

III - 3 

Programming.) 

 

1. TRANSMITTER ACTIVATE THE CAR JACKING:  

Press and hold 

 

 

button on the transmitter for 1 second while the 

vehicle’s ignition is ON.  The parking light wills turns on for 1.5” seconds 
to indicate car jacking activated. 

2. DOOR SWITCH ACTIVATE CAR JACKING:  

1.  Turn the ignition switch to “ON” position, the system is armed. 
2.  Once the system is armed, if you are forced from the vehicle, the system 

will active the car jacking trigger when the door is opened and closed 
while the ignition is “ON”. 

 
TRIGGER THE CAR JACK MODE: 

3-timer circuits will function as follows: 

First timer: 

a.  50 seconds after the system has been triggered. The siren will start 

chirping for 15 seconds.  

b.  During this 15 seconds period of chirping, you will be alerting to  push 

the valet switch once to turn off the car-jacking feature.  

c.  If not, it will enter second timer car jacking. 

Second timer:  

65 seconds after the system has beer triggered. The siren starts 
alarming and the parking light starts flashing. 

Third timer:  

90 seconds after the system has been triggered  

a.  The siren still alarming and the parking light flashing, and  
b.  The starter disable will activate to prevent the vehicle from starting. 
c.  It will remain active until the vehicle's battery power exhausted.  

  

OVERRIDE THE SYSTEM TO TURN OFF CAR JACKING: 

Turn the ignition  switch from OFF to ON, and within 10 seconds push 

valet switch, the siren will stop and the system disarmed 

 
IGNITION CONTROL DOOR LOCKS. 

 

If the vehicle’s door locks have been interfaced to the security system, the 
system will automatically lock the vehicle's doors when the ignition is turned 
“ON” and /or unlock the vehicle’s doors when the ignition is turned “OFF”. 
 

TRUNK RELEASE.  

Press and hold 

 

 

button on transmitter for two seconds to remote control 

the trunk release or other electric devices. 

 

Summary of Contents for Professional Vehicle Security System RF-215









Reviews: