14
15
ALTERNATOR OVERVIEW
ALTERNATIOR TEST
Use the (+Up and -Down) keys
to move cursor to the desired
test.
You will be instructed to
connect the large clamps to the
battery.
You will be prompted with the
OPTION to test the cables.
Note:
Battery should be in good condition and near full state of charge
before proceeding with this test. Press (N Esc.) to return to main menu.
Select
Alternator Test
then press (Y Enter).
If you select (Y Enter), you
will be instructed to connect
small clips to the alternator as
illustrated in the setup. Press
(Y Enter) to continue.
Start engine.
Allow the voltage to stabilize
until it stops rising. Press (Y
Enter)
Allow the BVA-350 to finish
the test (approximately 3 to 5
seconds).
BATTERY
STARTER
>ALTERNATOR
VOLTAGE DROP
>ALLOW VOLTAGE
TO STABILIZE
14.74V
‘Y’ TO CONTINUE.
START ENGINE.
‘N’ TO CANCEL
>CONNECT LARGE
CLAMPS TO THE
BATTERY
‘Y’ TO CONTINE
>CONNECT SMALL
CLIPS TO THE
ALTERNATOR
‘N’ OR ‘Y’
TESTING ALTER.
PLEASE WAIT…
>OPTION: ALSO
TEST ALTERNATOR
CABLES?
‘N’ OR ‘Y’
