BusPro-620s HOOKUP POTENTIAL
Charge up to 36 12-Volt batteries
n
Each station delivers 5 Amps to one battery
n
With optional AC-8 lead sets each station
delivers 2.5 Amps to each battery
n
In order to charge 36 batteries follow the steps
below:
Using optional AC-8 lead
sets hookup two 12 Volt
batteries in parallel
to each station of
the BusPro-620s as
shown.
Note
: If red light
flashes detach
one battery
to determine
which battery is
defective. Recommended
for maintenance only or comparable
batteries in size and state of charge.
Step 2 Using the
Optional Lead Sets
Step 1 Hooking Up 3 Bus-Pro-620s Chargers
Hook 3 units together by plugging the next unit into the AC cord
(If cord must be added See PG. 5)
. Make sure the power source
supplied to the first BusPro-620s is adequate. A typical outlet will
only supply 3 BusPro-620s units.
9
