2.5 S-ONE Alarm Panel
2.5.1 Hardware Connections
The rear side of the S-ONE Alarm Panel has the following interfaces.
Connection Interfaces
* not supported
Cable Strain Relief
Make sure the following cables are tied with wire wrap to the strain relief eyes on the back
panels.
■ Ethernet cables
■ HDMI cables
■ USB cables
Page 7 (49)
6. NMEA 2000* (isolated)
7. Ethernet 1 RJ45*
8. Ethernet 2 RJ45 (for network communication)
9. 2x USB-A
10. USB-A
11. HDMI out*
1. CAN bus*
2. Relay*
3. Modbus RTU*
4. Flexible I/O*
5. Power supply 12 V / 24 V
Connectivity
Power Supply
12 V / 24 V
USB
USB 2.0 High-speed interface
Reserved for software update, event log extraction, and configuration file
handling.
Ethernet 2
RJ45. Used for networking.
Miscellaneous
Buzzer
Activates for any new event.
Ambient Light Sensor
Automatically adjustment of screen brightness.
Proximity Sensor
Motion detection.
