Date & Time
Sets the date and time of the panel.
Factory Reset
A Factory Reset will remove and reset the following
■ Configuration
■ Event log
■ User PIN code
Software Update
Updates the software of the Alarm Panel.
Insert a USB storage device with a software update file,
marine-watch-image.mender
,
and press the
Software Update
button to start the update.
5.1.5 Network
Set the IP address of this Alarm Panel. The default IP address is 192.168.0.
151
.
Make sure all IP addresses in use on the network are unique.
5.1.6 Panel Name
The Panel Name is displayed in the header bar.
Page 29 (49)
The software update process takes several minutes. Do not unplug the power
supply.